Indoor vs Outdoor Digital Signage

  • Jun 27, 2019
  • Brandon

Digital signage is an effective way in which thousands of businesses convey certain messages to their consumers.

Whether it’s to attract potential clients, advertise special offers, or display job vacancies, signage is still an integral part of any business.

There are two main types of digital signage; indoor and outdoor.

Indoor signage is a collective term for any sign placed inside of a business. They are targeted towards individuals who’ve already made the choice to explore what a business has to offer.

These signs are designed in such a way that they encourage the audience to move towards a desired action; such as signing up for a new credit card at the bank or upsizing a meal at a restaurant.

On the other hand, outdoor signage refers to any sign found outside of the business. They can be used for an array of services ranging from advertising a drive-thru to displaying promotional content. Generally, the goal is to move audiences to walk into a business.

Both signages are ideal for a number of marketing purposes.

As a rule of thumb, however, indoor signage should never be used for outdoor purposes and vice versa.

Primarily because of two vital considerations most people tend to overlook; sunlight and exposure.

Sunlight

Have you noticed how difficult it is to watch television when the curtains are open; especially on a sunny day? No matter how hard you squint your eyes, you’ll always find the objects on the screen are inconceivable. That is until you block the sunlight.

The reason behind this is simple.

Glare is caused by the high intensity with which the sun produces light.

Unfortunately, no indoor display can compete with such brightness. Just to put this into perspective, the average indoor LED screen (such as your consumer grade tv) emits light with an intensity of about 200-500 cd/m2.

This is way below the sun’s luminance; let alone that of outdoor signage which is upwards of 2,250 cd/m2.

Simply put, using an indoor signage outside is wasting time and money. Not only will you incur a hefty power bill, but also miss out on any potential customers.

Let’s face it; no one will be able to see your advertisement on a sunny day.

On the other hand, when you use an outdoor signage for indoor advertising, it  causes a lot of discomfort to customers.

In dimly-lit businesses such as restaurants, the bright light from an outdoor signage can cause eye irritation, migraines, and even trigger a  seizure.

Exposure

As light moves through the atmosphere, it encounters a myriad of tiny particles and obstructions such as dust, steam, and suspended water droplets.

These particles distort the light beam by either reflecting, refracting, or absorbing it.

The signs will then appear blurry or completely distorted to the human eye.

As a matter of fact, exposure is a common issue that plagues both indoor and outdoor signage.

To handle it, you need to analyze two vital factors of the atmosphere; particulate and moisture.

Particulate refers to any particles present in the atmosphere. We’re talking dust particles and other small airborne particles.

While moisture refers to the presence of water droplets in the atmosphere.

Their presence not only obscures your signage, but also causes damage to vital components if they penetrate the signage’s protective casing.

This is commonly observed in restaurants where there is a large concentration of steam caused by boiling water. The steam will gather under the fixture and eventually penetrate the light casing. 

Nevertheless, it is much easier to control particulate and moisture in indoor environments.

For outdoor signage, however, it’s a whole other story.

Wind can accelerate particle matter and rain making them extremely aggressive on the display casing.

To standardized protection from these environmental harms, the IP (ingress protection) rating system was developed.

What is an IP Rating?

An IP rating is an international standard guideline used to determine the level of efficacy for protecting light exposures against external objects, as well as the effects of moisture.

When labelling, there are two numbers that follow the IP denotation (e.g. IP65).

Each number represents a distinct type of protection measure put in place to shield the signage.

First Digit

The first digit denotes intrusion protection (safeguarding against objects, dust particles, etc.), and it runs from 0-6.

It can also be labelled x, which means that there is no rating or protection for that particular signage.

That being said, here are the different protection measures that each number denotes:

  • (or x) No safeguards in place.
  • Denotes protection from massive bodies that have a diameter of 50mm or greater. These include objects such as rodents, or obscurities such as an arm or a baseball bat.
  • Refers to safeguards against bodies with a length smaller than 80 mm and a maximum diameter of 12 mm. A good example would be your middle fingers.
  • Denotes protection from objects with a 2.5 mm diameter or greater. These include small tools such as wires.
  • Refers to safeguards against small objects having a diameter of 1mm or greater such as insects protruding wires, or nails.
  • Denotes protection against dust particles
  • The 6th rating, which is the most common rating in most outdoor fixtures, refers to full protection against all dust particles (as well as other particles in the atmosphere). The fixture is also fortified with a vacuum seal for nonstop air flow. Commonly known as ‘Dust tight.’

Second Digit

The second digit denotes protection against different forms of moisture.

  • (or X) No safeguards in place.
  • Denotes protection from vertically falling rain that is caused by condensation. Such that when the fixture is upright, it is fully protected.
  • Refers to safeguards put in place to protect the fixture from rain falling at an angle of 15 degrees from the normal.
  • Safeguards against rain or droplets falling at an angle of 60 degrees from the normal.
  • Refers to protection against splashing water coming from all directions. Before being approved, the fixture is first tested with an oscillating spray a few minutes after the safety measures have been fitted on the display.
  • Denotes safeguards from low-pressure jets of water hitting the fixture from any direction or angle.
  • Refers to Safeguards against high pressure jets hitting the fixture.
  • This denotes any protective measures put in place when the fixture is immersed in water for up to 30 minutes between the depths of 0.15 to a meter.
  • Refers to safeguards put in place to protect the fixture in great depths of water under high pressure.
  • This refers to protection against high-temperature water sprays, high pressure, and virtually any kind of moisture disturbance.

For most outdoor signs, the standard rating is IP65, which denotes that the fixture is ‘dust tight’ and protected from most moisture effects, including low-pressure jets of water.

Ideally, both signage types play a critical role in advertising.

But before a business can purchase a signage, it should know exactly how it plans to market itself for best results.

And once signage is selected, maintenance remains a key factor in ensuring these signs remain efficient and effective for years to come.

You can learn more about NexSigns’ Digital Signage solution and connect with us on FacebookLinkedInTwitter, and YouTube to get the latest info on digital signage!

Leave a Reply

Your email address will not be published. Required fields are marked *